JAL International Co. Ltd.
Senior QA/QC Engineer
Jubail, Saudi ArabiaPosted 2 days ago
- Salary
- AED 20k–25k a month· est.
- Job type
- Full time
- Level
- Senior
- Field
- Construction & Engineering
- Work mode
- On site
About the role
Role overview We are seeking an experienced Senior QA/QC Engineer to provide independent, evidence-based quality oversight across quality planning, engineering and supplier interfaces, fabrication, inspection, testing, nonconformance control and turnover. You will work independently within delegated authority, coordinate technical interfaces, recognize risk and coach less experienced colleagues. Key responsibilities • Build or review project quality plans and ITPs from contract, statutory and customer requirements, setting inspection stages, acceptance criteria, hold/witness points, traceability and records. • Review specifications, drawings and changes for quality and inspectability; resolve conflicts through documented technical queries. • Assess supplier quality risk and capability; plan risk-based audits and source inspections; track supplier NCRs to verified closure. • Control material identification and traceability from receipt to handover, including substitutions and segregation. • Coordinate welding and fabrication controls: procedures, personnel, consumables, preheat/interpass, repairs, examination and traceability. • Plan and coordinate inspection, NDT, pressure/leak testing and FAT; check methods, coverage, acceptance criteria, personnel scope and calibration. • Lead containment and impact review for nonconformances, route dispositions to authorized personnel and verify corrective action effectiveness. • Plan or lead process, project and supplier audits; use trends to recommend practical improvement. • Control measurement and calibration status, including out-of-tolerance equipment and affected-result reviews. • Define and check turnover dossier completion criteria, certificates, reports and punch items to prevent unsupported handover. • Communicate requirements and risks to operations, engineering, suppliers and clients; escalate unresolved compliance risks and protect independent quality judgment. • Coach and review the work of junior QA/QC staff. Required qualifications and experience • Engineering or relevant technical qualification, or documented equivalent competence appropriate to the product and role. • Progressively responsible QA/QC experience in the same or a transferable industry, product, process and project phase, with demonstrated senior-level (independent) ownership of plans, decisions and records. • Working knowledge of ISO 9001 and ISO 19011, plus the codes applicable to the role, such as ASME BPVC/B31.3, ISO 3834 and welding standards, and, where relevant, EU PED 2014/68/EU and EN standards. • Familiarity with ISO/IEC 17025, measurement traceability, and ISO 14001/ISO 45001 interfaces with site work. Credentials (as required by the specific duties) • Internal or lead auditor training, where audits are part of the role. • API 510, 570 or 653 certification, only where the asset and duties require it. • Welding inspection qualification such as CSWIP or AWS CWI, or another recognized scheme. • Method- and level-specific NDT certification (for example EN ISO 9712) for any NDT tasks to be performed or interpreted. • Any statutory or client inspector appointment, registration or specialist authorization required for the project. All credentials will be verified with the issuing body or official register, including status, scope and expiry. Candidates should be prepared to present project examples and records that demonstrate their personal contribution. Authority boundary Engineering approval, process operation, formal product disposition and final release remain with the designated authorized role holders and the applicable code or regulatory scheme.
Requirements
Engineering or relevant technical qualification, or documented equivalent competence appropriate to the product and role. Progressively responsible QA/QC experience in the same or a transferable industry, product, process and project phase, with demonstrated senior-level (independent) ownership of plans, decisions and records. Working knowledge of ISO 9001 and ISO 19011, plus the codes applicable to the role, such as ASME BPVC/B31.3, ISO 3834 and welding standards, and, where relevant, EU PED 2014/68/EU and EN standards. Familiarity with ISO/IEC 17025, measurement traceability, and ISO 14001/ISO 45001 interfaces with site work.
Responsibilities
Build or review project quality plans and ITPs from contract, statutory and customer requirements, setting inspection stages, acceptance criteria, hold/witness points, traceability and records. Review specifications, drawings and changes for quality and inspectability; resolve conflicts through documented technical queries. Assess supplier quality risk and capability; plan risk-based audits and source inspections; track supplier NCRs to verified closure. Control material identification and traceability from receipt to handover, including substitutions and segregation. Coordinate welding and fabrication controls: procedures, personnel, consumables, preheat/interpass, repairs, examination and traceability. Plan and coordinate inspection, NDT, pressure/leak testing and FAT; check methods, coverage, acceptance criteria, personnel scope and calibration. Lead containment and impact review for nonconformances, route dispositions to authorized personnel and verify corrective action effectiveness. Plan or lead process, project and supplier audits; use trends to recommend practical improvement. Control measurement and calibration status, including out-of-tolerance equipment and affected-result reviews. Define and check turnover dossier completion criteria, certificates, reports and punch items to prevent unsupported handover. Communicate requirements and risks to operations, engineering, suppliers and clients; escalate unresolved compliance risks and protect independent quality judgment. Coach and review the work of junior QA/QC staff.
Skills
- ISO 9001
- ISO 19011
- ASME BPVC
- ASME B31.3
- ISO 3834
- welding standards
- EU PED 2014/68/EU
- EN standards
- ISO/IEC 17025
- measurement traceability
- ISO 14001
- ISO 45001
- NDT (EN ISO 9712)
Not sure you fit this role?
Upload your CV and see how you score against JAL International Co. Ltd. and every other live job. It's free.
Get my free matchesAED 20k–25k a month· est.
Similar jobs across the Gulf
QC Inspector
NASS Group & CorporationMuharraq, Bahrain
AED 8k–15k a month· est.
QC Inspector
Nass Group & CorporationAl Hidd, Bahrain
AED 2k–3k a month· est.
QA/QC Associate Manager
Havelock One InteriorsManama, Bahrain
AED 39k–68k a month· est.
INSPECTOR - SENIOR QA/QC
Bureau VeritasDoha, Qatar
AED 9k–12k a month· est.
Senior QAQC Engineer
Nass Group & CorporationRiffa, Bahrain
AED 9k–18k a month· est.
Senior Quality Engineer
HanmiGlobal SaudiRiyadh, Saudi Arabia
AED 15k–25k a month