PGESCO
Electrical Commissioning & Maintenance Engineer (Power Plants)
Riyadh, Saudi ArabiaPosted today
- Salary
- AED 6k–9k a month· est.
- Job type
- Full time
- Level
- Senior
- Field
- Energy & Sustainability
- Work mode
- On site
About the role
Position Summary: Leads field verification, as-built validation, troubleshooting, and rehabilitation supervision for electrical power, protection, and backup systems in a Combined Cycle Gas Turbine (CCGT) power plant. Evaluates out-of-service or faulty electrical equipment, troubleshoots live plant distribution systems, and supports management across critical adjustment scopes, including Emergency Diesel Generator (EDG) integration, High-Speed Bus Transfer (HSBT) systems, MV/LV switchgear, procurement, electrical commissioning, and asset tagging. Key Responsibilities • Perform detailed site walkdowns of HV/MV/LV switchgear, generator, step-up and auxiliary transformers, MCCs, busducts, DC/UPS systems, grounding, and cable routing, cross-checking field conditions against Single Line Diagrams (SLDs), schematics, and cable schedules to produce accurate "As-Built" documentation. • Rapidly diagnose faults and abnormal conditions in normal plant electrical systems, assessing out-of-service transformers, breakers, motors, protection relays, and UPS/battery banks to judge serviceability and define corrective actions. • Review, verify, and witness testing of Emergency Diesel Generator (EDG) electrical systems, synchronization, load-shedding/auto-transfer schemes, and High-Speed Bus Transfer (HSBT) logic and settings to ensure seamless emergency power changeover. • Maintains a uniform log of master markup of all “As-Built” records. • Acts as single point of contact to Electrical related troubleshooting, verification and related markup records. • Ability to lead other team members in areas of workload balancing, assignment, verification of outputs, mentoring, training. • Ability to maintain up to date reporting system. • Ability to devise, coordinate and supervise practical testing schemes to ensure connectivity of electrical equipment with minimal disruptions to the plant and absolute avoidance of shutdowns. • Define technical scopes, BOQs, and specifications for electrical replacement equipment, switchgear components, cables, and relays, while supporting vendor technical evaluations and factory/site acceptance tests (FAT/SAT). • Oversee electrical contractors executing cable laying, termination, megohm/hi-pot testing, relay injection testing, and loop checks to ensure compliance with approved ITPs and procedures. • Audit and install missing physical KKS/equipment tags on electrical panels, breakers, motors, and junction boxes, recording complete nameplate and technical data for SAP/CMMS integration. • Produce technical evaluation reports, nonconformance notices, punch lists, and turnover packages while coordinating power isolations and interfaces with I&C, Mechanical, and Operations teams. Qualifications Required: • Bachelor’s degree in Electrical Engineering (Power Systems focus preferred). • 7 to 10 years of experience in power plant electrical commissioning, maintenance, testing, or rehabilitation. Having completed at least 1 CCGT power plant is a must. • Proven expertise in MV/LV switchgear, protection relays, transformers, UPS/DC systems, EDG synchronization, and bus transfer schemes. • Proficient in interpreting and updating Single Line Diagrams (SLDs), protection coordination studies, and control schematics. • Experience with KKS asset identification and SAP/CMMS maintenance databases is a plus
Requirements
Bachelor’s degree in Electrical Engineering (Power Systems focus preferred). 7 to 10 years of experience in power plant electrical commissioning, maintenance, testing, or rehabilitation. Having completed at least 1 CCGT power plant is a must. Proven expertise in MV/LV switchgear, protection relays, transformers, UPS/DC systems, EDG synchronization, and bus transfer schemes. Proficient in interpreting and updating Single Line Diagrams (SLDs), protection coordination studies, and control schematics. Experience with KKS asset identification and SAP/CMMS maintenance databases is a plus
Responsibilities
Perform detailed site walkdowns of HV/MV/LV switchgear, generator, step-up and auxiliary transformers, MCCs, busducts, DC/UPS systems, grounding, and cable routing, cross-checking field conditions against Single Line Diagrams (SLDs), schematics, and cable schedules to produce accurate "As-Built" documentation. Rapidly diagnose faults and abnormal conditions in normal plant electrical systems, assessing out-of-service transformers, breakers, motors, protection relays, and UPS/battery banks to judge serviceability and define corrective actions. Review, verify, and witness testing of Emergency Diesel Generator (EDG) electrical systems, synchronization, load-shedding/auto-transfer schemes, and High-Speed Bus Transfer (HSBT) logic and settings to ensure seamless emergency power changeover. Maintains a uniform log of master markup of all “As-Built” records. Acts as single point of contact to Electrical related troubleshooting, verification and related markup records. Ability to lead other team members in areas of workload balancing, assignment, verification of outputs, mentoring, training. Ability to maintain up to date reporting system. Ability to devise, coordinate and supervise practical testing schemes to ensure connectivity of electrical equipment with minimal disruptions to the plant and absolute avoidance of shutdowns. Define technical scopes, BOQs, and specifications for electrical replacement equipment, switchgear components, cables, and relays, while supporting vendor technical evaluations and factory/site acceptance tests (FAT/SAT). Oversee electrical contractors executing cable laying, termination, megohm/hi-pot testing, relay injection testing, and loop checks to ensure compliance with approved ITPs and procedures. Audit and install missing physical KKS/equipment tags on electrical panels, breakers, motors, and junction boxes, recording complete nameplate and technical data for SAP/CMMS integration. Produce technical evaluation reports, nonconformance notices, punch lists, and turnover packages while coordinating power isolations and interfaces with I&C, Mechanical, and Operations teams.
Skills
- MV/LV switchgear
- protection relays
- transformers
- UPS/DC systems
- Emergency Diesel Generator (EDG) synchronization
- bus transfer schemes
- Single Line Diagrams (SLDs)
- cable routing
- SCADA/control schematics (implied by context)
- KKS asset identification
- SAP/CMMS maintenance databases
- FAT/SAT testing
- I&C interfacing
- power plant commissioning
Not sure you fit this role?
Upload your CV and see how you score against PGESCO and every other live job. It's free.
Get my free matchesAED 6k–9k a month· est.
Similar jobs across the Gulf
Commissioning & Maintenance Engineer (Mechanical, Power Plants)
PGESCORiyadh, Saudi Arabia
AED 12k–18k a month· est.
Electrical Manager
DAMAC PropertiesDubai, UAE
AED 15k–22k a month· est.
LEAD COMMISSIONING ENGINEER - ELECTRICAL
Bureau VeritasDoha, Qatar
AED 14k–21k a month· est.
Electrical Engineer
ENGIE Middle EastJubail, Saudi Arabia
AED 12k–18k a month· est.
Electrical Commissioning Engineer - Power Plant
TRACTEBELAbu Dhabi, UAE
AED 18k–32k a month· Michael Page
Testing and Commissioning Engineer
GE VernovaRiyadh, Saudi Arabia
AED 3k–7k a month· est.