Senior Engineer, Reservoir Simulation - ADNOC Onshore

About the Company We are the largest oil producer within the ADNOC Group, accounting for over half of ADNOC\u2019s total oil production. As the country\u2019s oldest oil production company, our operations date back to 1939, when a 75-year concession was signed to explore for oil and gas in Abu Dhabi. As a global industry leader in environmental sustainability, we are the first in the world to capture carbon from the iron and steel industry. Our Carbon Capture, Utilization, and Storage (CCUS) facility at Al Reyadah has the capacity to capture 800,000 tonnes of carbon dioxide (CO2) from Emirates Steel Industries (ESI) each year, for use in the Bab and Rumaitha oil fields to support Enhanced Oil Recovery (EOR). Al Reyadah is, therefore, a critical enabler of ADNOC\u2019s 2030 sustainability goals. JOB PURPOSE: Support the development and application of reservoir simulation models to assist in field development planning and production optimisation. Perform modelling, data analysis, and uncertainty assessments under guidance to improve reservoir understanding. Contribute to reservoir studies and translate results into practical insights to support operational decisions. KEY ACCOUNTABILITIES: Job Specific: \u2022 Develop and run reservoir simulation models, including basic history matching and scenario analysis. \u2022 Support reservoir characterisation and data integration in collaboration with Geoscience teams. \u2022 Assist in fluid modelling and EOS calibration under supervision. \u2022 Monitor model performance, identify issues, and support troubleshooting of simulation runs. \u2022 Contribute to reservoir management and recovery studies (e.g. waterflooding, EOR screening). \u2022 Apply standard methods for reserves estimation and production forecasting. \u2022 Support field development studies, including well performance and infill opportunities. \u2022 Integrate production and pressure data into models to improve reliability. \u2022 Assist in quality control of reservoir data and studies (e.g. PVT, SCAL, RCA). \u2022 Apply basic multiphase flow concepts and reservoir engineering principles in modelling work. Minimum Qualification \u2022 Bachelor Degree Reservoir/Petroleum/Chemical Engineering or equivalent. Minimum Experience & Knowledge & Skills \u2022 6-8 years of experience in reservoir engineering including oil and gas fields\u2019 development management and Full Field simulation studies (use software models). \u2022 Reservoir and Production Operations Knowledge. \u2022 Analytical Reservoir characterization (Material Balance) knowledge \u2022 Numerical reservoir simulation (Eclipse, Intersect) \u2022 Pressure Transient Analysis and Well Performance knowledge, PVT Modelling About the Company We are the largest oil producer within the ADNOC Group, accounting for over half of ADNOC\u2019s total oil production. As the country\u2019s oldest oil production company, our operations date back to 1939, when a 75-year concession was signed to explore for oil and gas in Abu Dhabi. As a global industry leader in environmental sustainability, we are the first in the world to capture carbon from the iron and steel industry. Our Carbon Capture, Utilization, and Storage (CCUS) facility at Al Reyadah has the capacity to capture 800,000 tonnes of carbon dioxide (CO2) from Emirates Steel Industries (ESI) each year, for use in the Bab and Rumaitha oil fields to support Enhanced Oil Recovery (EOR). Al Reyadah is, therefore, a critical enabler of ADNOC\u2019s 2030 sustainability goals. JOB PURPOSE: Support the development and application of reservoir simulation models to assist in field development planning and production optimisation. Perform modelling, data analysis, and uncertainty assessments under guidance to improve reservoir understanding. Contribute to reservoir studies and translate results into practical insights to support operational decisions. KEY ACCOUNTABILITIES: Job Specific: \u2022 Develop and run reservoir simulation models, including basic history matching and scenario analysis. \u2022 Support reservoir characterisation and data integration in collaboration with Geoscience teams. \u2022 Assist in fluid modelling and EOS calibration under supervision. \u2022 Monitor model performance, identify issues, and support troubleshooting of simulation runs. \u2022 Contribute to reservoir management and recovery studies (e.g. waterflooding, EOR screening). \u2022 Apply standard methods for reserves estimation and production forecasting. \u2022 Support field development studies, including well performance and infill opportunities. \u2022 Integrate production and pressure data into models to improve reliability. \u2022 Assist in quality control of reservoir data and studies (e.g. PVT, SCAL, RCA). \u2022 Apply basic multiphase flow concepts and reservoir engineering principles in modelling work. Minimum Qualification \u2022 Bachelor Degree Reservoir/Petroleum/Chemical Engineering or equivalent. Minimum Experien

Bachelor Degree in Reservoir/Petroleum/Chemical Engineering or equivalent. 6-8 years of experience in reservoir engineering including oil and gas fields’ development management and Full Field simulation studies (use software models). Reservoir and Production Operations Knowledge. Analytical Reservoir characterization (Material Balance) knowledge. Numerical reservoir simulation (Eclipse, Intersect). Pressure Transient Analysis and Well Performance knowledge, PVT Modelling.

Develop and run reservoir simulation models, including basic history matching and scenario analysis. Support reservoir characterisation and data integration in collaboration with Geoscience teams. Assist in fluid modelling and EOS calibration under supervision. Monitor model performance, identify issues, and support troubleshooting of simulation runs. Contribute to reservoir management and recovery studies (e.g. waterflooding, EOR screening). Apply standard methods for reserves estimation and production forecasting. Support field development studies, including well performance and infill opportunities. Integrate production and pressure data into models to improve reliability. Assist in quality control of reservoir data and studies (e.g. PVT, SCAL, RCA). Apply basic multiphase flow concepts and reservoir engineering principles in modelling work.