Senior Principal Mechanical Engineer

Job Description Job Overview: The Senior Principal Mechanical Engineer is tasked with solving unique and complex problems that broadly impact the business. They must proactively identify and solve the most complex problems that impact the Management and direction of the business. The Senior Principal Mechanical Engineer is considered a specialist in the field of Mechanical (Eng), and they offer a broad base of knowledge about the Engineering Function. The Senior Principal Mechanical Engineer impacts the direction and resource allocation of programs and projects in their discipline and works within general functional. Responsibilities Key Tasks and Responsibilities: • Perform conceptual, FEED, and detailed analyses and design as per design basis, project specifications, design codes, and standards • Develop creative and innovative solutions that are reliable and cost-effective for problems and challenges when they arise • Apply expertise to the most complex problems • Manage own time to meet objectives and (as Lead Engineer) forecast and plan resource requirements • Develop and manage plans to achieve business objectives • Clearly communicate and explain highly complex ideas and anticipate potential objections, influencing outcomes • When acting as Lead Engineer, in addition: • Direct large Mechanical Engineering team as a Lead Engineer • Lead the Discipline engineering design of the assigned work area and complete it within the planned schedule and budget, in accordance with standards, MOR, and project-specific procedures and to a high professional standard • Plan, organize, and direct all aspects of Discipline execution on the assigned project, including scope, deliverables, schedule, and all workforce resources - agree on allocations with the Discipline Manager • Ensure interfaces and deliverables are clearly identified • Maintain responsibility for progress and productivity, identifying any required corrective action • Act as project representative for the discipline during meetings with the Project Team, Customer discipline lead, and relevant agencies such as certifying authorities, auditors, third parties, etc • Become fully familiar with the project scope of work, specifications, schedule, and all inter-discipline requirements, including identifying concerns as early as practicable and taking appropriate initiatives to address the issues Interpret contractual requirements as they relate to engineering execution • Identify changes to scope and promptly raise change notifications, including providing any necessary supporting documentation and estimates • Provide similar support for Variation Orders • Interface with all disciplines to develop clash-free designs • Interface with other departments to obtain input for Discipline designs and drawings • Maintain close coordination with other engineering disciplines, Planning, and Project Management Team, as required • Document substantive communications (communications that result in significant decisions or assignment of actions) and forward copies to Discipline Lead Engineer and Discipline Manager • Prepare estimates for bid proposals, including technical query reviews, execution statements, and manhour estimates, identifying software requirements and any other project-specific requirements • Raise technical queries to obtain missing information, clarify work scope, and maintain preferred McDermott procedures, specifications, standards, practices, and operational requirements • Prepare, review, and (as Lead Engineer) approve Discipline engineering design basis, philosophies, and technical specifications • Participate in finalizing deliverables lists and deliverables, ensuring compliance with specifications and functional integrity • Review project schedule and fabrication schedule in relation to construction sequence, milestones, and engineering scope • Attend project kickoff and review meetings, vendor meetings, engineering meetings, and offshore site surveys, as required • Provide technical direction and review of Designers producing products related to Mechanical Engineering • Prepare, review, and (as Lead Engineer) approve design reports and procedures • Assist in providing necessary design inputs to other disciplines to enable them to proceed with their deliverables • Assist procurement personnel in procuring Discipline equipment, materials, and services; ensuring that work produced complies with Customer objectives and procedures Procurement assistance includes preparing, reviewing, and (as Lead Engineer) approving requisitions, evaluating technical quotations and preparing queries, compiling bid tabulations and recommendations, preparing purchase requisitions, and coordinating with Procurement to expedite vendor documents, as directed by Discipline Lead Engineer • Assist in updating weight report based on receipt of vendor information • Review and (as Lead Engineer) approve vendor and subcontractor submittals, checking for compliance with project specifications and providing comments as necessary • Review and (as Lead Engineer) approve design verification through single-discipline check/ inter­ discipline check (IDC) • Provide technical support to fabrication queries • Keep the Discipline Manager and Project Management Team apprised of all activities and concerns, technical, budgetary, and workforce-related • Assist in providing inputs for actual, Planning, and forecasting progress reports, including associated productivity • Check final subcontractor and vendor data manuals to ensure that all requested data has been received and approved • Present issues and problems to Customers in a timely manner and assist the Lead Engineer in negotiating resolution in accordance with project and company requirements • Perform (as required) Technical Quality Audit reviews in accordance with MDR Global Procedures • Assist Lead Engineer with responses to Customer and other agencies (such as certifying authorities, auditors, third parties, etc.) on their review and approval • Capture lessons learned and enter into MDR's Lessons Learned system • Provide leadership, mentoring, and guidance to other Engineers • Supervise and guide assigned engineers and coordinate with project Lead Designers for Discipline engineering and design deliverables • Assign personnel to analyze and design tasks based on knowledge of individual strengths and capabilities • Monitor costs of own work processes • Evaluate costs associated with products and solutions • Assist in the maintenance of departmental technical guidelines • Participate in development and maintenance of Global Procedures, Software, and Standards • Incorporate approved Lessons Learned into MOR Level 2 & 3 engineering procedures, as applicable • May participate in standards development committees or task groups • Recognized as having good communication and presentation skills (e.g., published technical papers are clearly written, actively participates in conferences and/or seminars, and/or is a capable • Present design solutions or topics at "lunch and learns"; etc.) • Assist the Department Manager in identifying departmental needs, including the development of personnel and technical capabilities • Participate in McDermott forums and represent McDermott as a subject matter expert (SME) • Provide information

Key Tasks and Responsibilities: Perform conceptual, FEED, and detailed analyses and design as per design basis, project specifications, design codes, and standards. Develop creative and innovative solutions that are reliable and cost-effective for problems and challenges when they arise. Apply expertise to the most complex problems. Manage own time to meet objectives and (as Lead Engineer) forecast and plan resource requirements. Develop and manage plans to achieve business objectives. Clearly communicate and explain highly complex ideas and anticipate potential objections, influencing outcomes. When acting as Lead Engineer, direct large Mechanical Engineering team as a Lead Engineer; lead the discipline engineering design of the assigned work area and complete it within the planned schedule and budget, in accordance with standards, MOR, and project-specific procedures and to a high professional standard. Plan, organize, and direct all aspects of discipline execution on the assigned project, including scope, deliverables, schedule, and all workforce resources - agree on allocations with the Discipline Manager. Ensure interfaces and deliverables are clearly identified. Maintain responsibility for progress and productivity, identifying any required corrective action. Act as project representative for the discipline during meetings with the Project Team, Customer discipline lead, and relevant agencies such as certifying authorities, auditors, third parties, etc. Become fully familiar with the project scope of work, specifications, schedule, and all inter-discipline requirements, including identifying concerns as early as practicable and taking appropriate initiatives to address the issues. Interpret contractual requirements as they relate to engineering execution. Identify changes to scope and promptly raise change notifications, including providing any necessary supporting documentation and estimates. Provide similar support for Variation Orders. Interface with all disciplines to develop clash-free designs. Interface with other departments to obtain input for Discipline designs and drawings. Maintain close coordination with other engineering disciplines, Planning, and Project Management Team, as required. Document substantive communications (communications that result in significant decisions or assignment of actions) and forward copies to Discipline Lead Engineer and Discipline Manager. Prepare estimates for bid proposals, including technical query reviews, execution statements, and manhour estimates, identifying software requirements and any other project-specific requirements. Raise technical queries to obtain missing information, clarify work scope, and maintain preferred McDermott procedures, specifications, standards, practices, and operational requirements. Prepare, review, and (as Lead Engineer) approve Discipline engineering design basis, philosophies, and technical specifications. Participate in finalizing deliverables lists and deliverables, ensuring compliance with specifications and functional integrity. Review project schedule and fabrication schedule in relation to construction sequence, milestones, and engineering scope. Attend project kickoff and review meetings, vendor meetings, engineering meetings, and offshore site surveys, as required. Provide technical direction and review of Designers producing products related to Mechanical Engineering. Prepare, review, and (as Lead Engineer) approve design reports and procedures. Assist in providing necessary design inputs to other disciplines to enable them to proceed with their deliverables. Assist procurement personnel in procuring Discipline equipment, materials, and services; ensuring that work produced complies with Customer objectives and procedures. Procurement assistance includes preparing, reviewing, and (as Lead Engineer) approving requisitions, evaluating technical quotations and preparing queries, compiling bid tabulations and recommendations, preparing purchase requisitions, and coordinating with Procurement to expedite vendor documents, as directed by Discipline Lead Engineer. Assist in updating weight report based on receipt of vendor information. Review and (as Lead Engineer) approve vendor and subcontractor submittals, checking for compliance with project specifications and providing comments as necessary. Review and (as Lead Engineer) approve design verification through single-discipline check/ inter-discipline check (IDC). Provide technical support to fabrication queries. Keep the Discipline Manager and Project Management Team apprised of all activities and concerns, technical, budgetary, and workforce-related. Assist in providing inputs for actual, Planning, and forecasting progress reports, including associated productivity. Check final subcontractor and vendor data manuals to ensure that all requested data has been received and approved. Present issues and problems to Customers in a timely manner and assist the Lead Engineer in negotiating resolution in accordance with project and company requirements. Perform (as required) Technical Quality Audit reviews in accordance with MDR Global Procedures. Assist Lead Engineer with responses to Customer and other agencies (such as certifying authorities, auditors, third parties, etc.) on their review and approval. Capture lessons learned and enter into MDR's Lessons Learned system. Provide leadership, mentoring, and guidance to other Engineers. Supervise and guide assigned engineers and coordinate with project Lead Designers for Discipline engineering and design deliverables. Assign personnel to analyze and design tasks based on knowledge of individual strengths and capabilities. Monitor costs of own work processes. Evaluate costs associated with products and solutions. Assist in the maintenance of departmental technical guidelines. Participate in development and maintenance of Global Procedures, Software, and Standards. Incorporate approved Lessons Learned into MOR Level 2 & 3 engineering procedures, as applicable. May participate in standards development committees or task groups. Recognized as having good communication and presentation skills (e.g., published technical papers are clearly written, actively participates in conferences and/or seminars, and/or is a capable presenter). Present design solutions or topics at “lunch and learns”; etc. Assist the Department Manager in identifying departmental needs, including the development of personnel and technical capabilities. Participate in McDermott forums and represent McDermott as a subject matter expert (SME). Provide information.